Solid Cemented Tungsten Carbide Rods (Full Length), Solid Carbide Endmill, Drills High Quality

Solid Cemented Tungsten Carbide Rods (Full Length):

The Carbide Rods are ideal materials for the Solid rotoary Cutting tools, like Solid Carbide Endmill, Drills, Remaers, Taps.etc.

TheStandard grade available as follow:

Standard grade for Cemented Carbide Rods in Rydmet :
The Grades For Cemented Tungsten Carbide Rods
Properties of Grade		RD06UF	RD08UF	RD09UF	RD10F	RD12UF
Co	%	6	8	9	10	12
WC incl. Doping	%	94	90	91%	90	88
Density	g/cm3	14.9	14.45	14.5	14.45	14.1
Vickers Hardness HV30	kg/mm2	1890	1790	1950	1580	1690
Rockwell Hardness HRA	ISO3738	93.5	93	93.8	91.8	>92.5
TRS	N/mm2	3900	4000	3500	3800	4000
Porosity	A	< 02	< 02	< 02	< 02	< 02
	B	0	0	0	0	0
	C	0	0	0	0	0
WC Grain Size	μm	0.5	0.5	0.3	0.8	0.4-0.5

Solid Carbide Rods (Full Length)

Solid Carbide Rods (Full length)
	Nominal Dia	D(mm)	D(mm)	Length	Remarks
	D (mm)	Un-ground	h6	mm
	0.5	0.7	0.5	310—330
	0.8	1	0.8	310—330
	1	1.2	1	310—330
	1.5	1.7	1.5	310—330
1/16"	1.5875	1.8	1.5875	12" —13"	inchin size
	2	2.2	2	310—330
	2.35	2.55	2.35	310—330
3/32"	2.38	2.6	2.38	12" —13"	inchin size
	2.5	2.7	2.5	310—330
	3	3.2	3	310—330
1/8"	3.175	3.4	3.175	12" —13"	inchin size
	3.5	3.7	3.5	310—330
5/32	3.968	4.2	3.968	12" —13"	inchin size
	4	4.2	4	310—330
	4.5		4.5	310—330
3/16"	4.7625	5.0	4.762	12" —13"	inchin size
	5	5.2	5	310—330
	5.5	5.7	5.5	310—330
	6	6.2	6	310—330
1/4"	6.35	6.6	6.35	12" —13"	inchin size
	6.5	6.7	6.5	310—330
	7	7.2	7	310—330
	7.5	7.7	7.5	310—330
5/16"	7.937	8.2	7.937	12" —13"	inchin size
	8	8.2	8	310—330
	8.5	8.7	8.5	310—330
	9	9.2	9	310—330
	9.5	9.7	9.5	310—330
3/8"	9.525	9.7	9.525	12" —13"	inchin size
	10	10.2	10	310—330
	10.5	10.7	10.5	310—330
	11	11.2	11	310—330
7/16"	11.11	11.3	11.11	12" —13"	inchin size
	11.5	11.7	11.5	310—330
	12	12.2	12	310—330
	12.5	12.7	12.5	310—330
1/2"	12.7	12.9	12.7	12" —13"	inchin size
	13	13.2	13	310—330
	13.5	13.7	13.5	310—330
	14	14.2	14	310—330
9/16"	14.288	14.5	14.288	12" —13"	inchin size
	14.5	14.7	14.5	310—330
	15	15.2	15	310—330
	15.5	15.7	15.5	310—330
5/8"	15.875	16.1	15.875	12" —13"	inchin size
	16	16.2	16	310—330
	16.5	16.7	16.5	310—330
	17	17.2	17	310—330
	17.5	17.7	17.5	310—330
	18	18.2	18	310—330
	18.5	18.7	18.5	310—330
	19	19.2	19	310—330
3/4"	19.05	19.3	19.05	12" —13"	inchin size
	19.5	19.7	19.5	310—330
	20	20.2	20	310—330
	20.5	20.7	20.5	310—330
	21	21.2	21	310—330
	21.5	21.7	21.5	310—330
	22	22.2	22	310—330
	22.5	22.7	22.5	310—330
	23	23.2	23	310—330
	23.5	23.7	23.5	310—330
	24	24.2	24	310—330
	24.5	24.7	24.5	310—330
	25	25.2	25	310—330
1"	25.4	25.7	25.4	12" —13"	inchin size
	26	26.3	26	310—330
	27	27.2	27	310—330
	28	28.2	28	310—331
	29	29.2	29	310—333
	30	30.2	30	310—334
	31	31.2	31	310—335
1-1/4"	31.75	32.0	31.75	12" —13"	inchin size
	32	32.2	32	310—336
	33	33.2	33	310—337
	34	34.2	34	310—338
	35	35.2	35	310—339
	36	36.2	36	310—340
	37	37.2	37	310—341
	38	38.2	38	310—342
1-1/2"	38.1	38.4	38.1	12" —13"	inchin size
	39	39.2	39	310—343
	40	40.2	40	310—344
	42	42.2	42	310—344

Carbide Rods with Special Diameter and length can be made as request.

TOLERANCES For Diameter and Length (h6)			TOLERANCES for Roundness and Straightness (h6 )
Size, mm	D, h6	L	Size, mm	Straightness (Run-out) 0.15 max 0.08 max 0.06 max 0.05 max	Roundness

≤3	+0,-0.006	+5/+1	≤4		0.004 max
5 to 6	+0, -.008		5 to 10
8 to 10	+0, -.009		10 to 13
12 to 18	+0, -.011		>13
20 to 24	+0, -.013